Differentiated Service Command - Fujitsu Siemens Computers PRIMERGY BX Description

Differentiated Service Command

Syntax
quit
Default Setting
None
Command Mode
Privileged Exec
7.15 Differentiated Service Command
Note: This Switching Command function can only be used on the QoS software version.
This chapter contains the CLI commands used for the QOS Differentiated Services (DiffServ)
package.
The user configures DiffServ in several stages by specifying:
1. Class
• creating and deleting classes
• defining match criteria for a class
Note: The only way to remove an individual match criterion from an existing class definition is
to delete the class and re-create it.
2. Policy
• creating and deleting policies
• associating classes with a policy
• defining policy statements for a policy/class combination
3. Service
• adding and removing a policy to/from a directional (that is, inbound, outbound)
interface
Packets are filtered and processed based on defined criteria. The filtering criteria are
defined by a class. The processing is defined by a policy's attributes. Policy attributes may be
defined on a per class instance basis, and it is these attributes that are applied when a match
occurs.
Packet processing begins by testing the match criteria for a packet. A policy is applied to a
packet when a class match within that policy is found.
Note that the type of class - all, any, or acl - has a bearing on the validity of match criteria
specified when defining the class. A class type of 'any' processes its match rules in an ordered
sequence; additional rules specified for such a class simply extend this list. A class type of 'acl'
obtains its rule list by interpreting each ACL rule definition at the time the Diffserv class is
created. Differences arise when specifying match criteria for a class type 'all', since only one
value for each non-excluded match field is allowed within a class definition. If a field is already
specified for a class, all subsequent attempts to specify the same field fail, including the cases
498
Command Reference
Lan Switch and Router Blade