Dhcp Relay Commands - Fujitsu Siemens Computers PRIMERGY BX Description

Management Commands
7.5.8.1 ip dhcp restart
This command is used to initiate a BOOTP or DCHP client request.
Syntax
ip dhcp restart
Default Setting
None
Command Mode
Global Config
7.5.8.2 ip dhcp client-identifier
This command is used to specify the DCHP client identifier for this switch. Use the no form to
restore to default value.
Syntax
ip dhcp client-identifier {text <text> | hex <hex>}
no ip dhcp client-identifier
<text> - A text string. (Range: 1-15 characters).
<hex> - The hexadecimal value (00:00:00:00:00:00).
no - This command is used to restore to default value.
Default Setting
System Burned In MAC Address
Command Mode
Global Config

7.5.9 DHCP Relay Commands

7.5.9.1 Show bootpdhcprelay
402
Command Reference
Lan Switch and Router Blade