Configuration Commands - Fujitsu Siemens Computers PRIMERGY BX Description

User Account Management Commands
Read/Write access and guest has Read Only access. There can only be one Read/Write
user and up to five Read Only users.
SNMPv3 AccessMode: This field displays the SNMPv3 Access Mode. If the value is set to
Read- Write, the SNMPv3 user will be able to set and retrieve parameters on the system. If
the value is set to ReadOnly, the SNMPv3 user will only be able to retrieve parameter
information. The SNMPv3 access mode may be different from the CLI and Web access
mode.
SNMPv3 Authentication: This field displays the authentication protocol to be used for the
specified login user.
SNMPv3 Encryption: This field displays the encryption protocol to be used for the specified
login user.

7.9.2 Configuration Commands

7.9.2.1 username
This command adds a new user (account) if space permits. The account <username> can be
up to eight characters in length. The name may be comprised of alphanumeric characters as
well as the dash ('-') and underscore ('_'). The <username> is not case-sensitive.
Six user names can be defined.
This command changes the password of an existing operator. User password should not be
more than eight characters in length. If a user is authorized for authentication or encryption is
enabled, the password must be eight alphanumeric characters in length. The username and
password are not case-sensitive. When a password is changed, a prompt will ask for the
operator's former password. If none, press enter.
Syntax
username <username> {password | nopassword}
no username <username>
<username> - is a new user name (Range: up to 8 characters).
no - This command removes a user name created before.
Note: The admin user account cannot be deleted.
nopassword - This command sets the password of an existing operator to blank. When a
password is changed, a prompt will ask for the operator's former password. If none, press
enter.
Default Setting
No password
Command Mode
Global Config
432
Command Reference
Lan Switch and Router Blade