Distance Vector Multicast Routing Protocol (DVMRP) Commands
The default priority value is 100.
Command Mode
Interface Config
7.26.2.7 ip vrrp timers advertise
This command sets the advertisement value for a virtual router in seconds.
Syntax
ip vrrp <1-255> timers advertise <1-255>
ip vrrp <1-255> timers advertise
<1-255> - The range of virtual router ID is 1 to 255.
< 1-255 > - The range of advertisement interval is 1 to 255.
<no> - This command sets the default advertisement value for a virtual router.
.
Default Setting
The default value of advertisement interval is 1.
Command Mode
Interface Config
7.27 Distance Vector Multicast Routing Protocol (DVMRP) Commands
This section provides a detailed explanation of the DVMRP commands. The commands
are divided into the following different groups:
Show commands are used to display device settings, statistics and other information.
Configuration commands are used to configure features and options of the switch. For every
configuration command there is a show command that will display the configuration setting.
7.27.1 Show Commands
7.27.1.1 show ip dvmrp
This command displays the system-wide information for DVMRP
615
Command Reference
Lan Switch and Router Blade