Configuration Commands - Fujitsu Siemens Computers PRIMERGY BX Description

Internet Group Management Protocol (IGMP) Commands
Display Message
Querier Status This field indicates the status of the IGMP router, whether it is running in
Querier mode or Non-Querier mode.
Querier IP Address This field displays the IP Address of the IGMP Querier on the IP subnet
to
which this interface is attached.
Querier Up Time This field indicates the time since the interface Querier was last changed.
Querier Expiry Time This field displays the amount of time remaining before the Other
Querier
Present Timer expires. If the local system is the querier, the value of this object is
zero.
Wrong Version Queries This field indicates the number of queries received whose IGMP
version does not match the IGMP version of the interface.
Number of Joins This field displays the number of times a group membership has been
added on this interface.
Number of Groups This field indicates the current number of membership entries for this
interface.

7.28.2 Configuration Commands

7.28.2.1 ip igmp
This command sets the administrative mode of IGMP in the router to active
Syntax
ip igmp
no ip igmp
no - This command sets the administrative mode of IGMP in the router to inactive.
Default Setting
Disabled
Command Mode
Global Config
7.28.2.2 ip igmp version
This command configures the version of IGMP for an interface.
624
Command Reference
.
Lan Switch and Router Blade