Configuration Commands - Fujitsu Siemens Computers PRIMERGY BX Description

Routing Information Protocol (RIP) Commands
Receive Version: The RIP version(s) allowed when receiving updates from the specified
interface. The types are none, RIP-1, RIP-2, Both
RIP Mode: RIP administrative mode of router RIP operation; enable, disable it.
Link State: The mode of the interface (up or down).

7.23.2 Configuration Commands

7.23.2.1 enable rip
This command resets the default administrative mode of RIP in the router (active).
Syntax
enable
no enable
no - This command sets the administrative mode of RIP in the router to inactive.
Default Setting
Enable
Command Mode
Router RIP Config
7.23.2.2 ip rip
This command enables RIP on a router interface.
Syntax
Ip rip
no ip rip
no - This command disables RIP on a router interface.
Default Setting
597
Command Reference
Lan Switch and Router Blade