Accessing Mib Objects - Fujitsu Siemens Computers PRIMERGY BX Description

Accessing MIB Objects

8.2 Accessing MIB Objects
MIB objects represent features of the switch that an SNMP application can control and manage.
One example is the RFC-2233 IF-MIB group which you can use to get or set the port
configuration by reading or writing to different variables
in this MIB group. The variables supported by this group are listed in the following table.
RFC 2233 IF-MIB
interfaces
ifNumber
ifMIBObjects
ifTableLastChange
ifStackLastChange
ifTable
ifDescr
ifType
ifMtu
ifSpeed
ifPhysAddress
ifAdminStatus
ifOperStatus
ifLastChange
ifInOctets
ifInUcastPkts
ifInNUcastPkts
ifInDiscards
ifInErrors
ifInUnknownProtos
659
No RO
YES RO
No RO
Index: ifIndex
Yes RO
Yes RO
Yes RO
Yes RO
Yes RO
Yes RW
Yes RO
Yes RO
Yes RO
Yes RO
Yes RO
Yes RO
Yes RO
NO RO
Using SNMP
Lan Switch and Router Blade