Bootp/Dhcp Relay Commands; Show Bootpdhcprelay - Fujitsu Siemens Computers PRIMERGY BX Description

Bootp/DHCP Relay Commands

7.20.2.38
This command sets the number of paths that OSPF can report for a given destination where
<maxpaths> is platform dependent.
Syntax
maximum-paths <1-1>
no maximum-paths
< 1-1 > - The maximum number of paths that OSPF can report for a given destination.
The range of the value is 1 to 1.
Default Setting
The default value is 1.
Command Mode
Router OSPF Config.
7.21 Bootp/DHCP Relay Commands

7.21.1 show bootpdhcprelay

This command displays the BootP/DHCP Relay information.
Syntax
show bootpdhcprelay
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Message
Maximum Hop Count: Is the maximum allowable relay agent hops.
Minimum Wait Time (Seconds) Is the minimum wait time.
Admin Mode Represents whether relaying of requests is enabled or disabled.
Server IP Address Is the IP Address for the BootP/DHCP Relay server.
584
Command Reference
Lan Switch and Router Blade