Acl Command; Show Commands - Fujitsu Siemens Computers PRIMERGY BX Description

ACL Command

7.16 ACL Command

7.16.1 Show Commands

7.16.1.1 show mac access-lists
This command displays a MAC access list and all of the rules that are defined for the ACL. The
<name> parameter is used to identify a specific MAC ACL to display.
Syntax
show mac access-list <name>
<name> ACL name which uniquely identifies the MAC ACL to display.
Default Setting
None
Command Mode
Privileged EXEC
Display Message
MAC ACL Name The name of the MAC ACL rule.
Rule Number The ordered rule number identifier defined within the ACL.
Action Displays the action associated with each rule. The possible values are Permit or
Deny.
Source MAC Address Displays the source MAC address for this rule.
Source MAC Mask Displays the source MAC mask for this rule.
Destination MAC Address Displays the destination MAC address for this rule.
Destination MAC Mask Displays the destination MAC mask for this rule.
Ethertype Displays the Ethertype keyword or custom value for this rule.
VLAN ID Displays the VLAN identifier value or range for this rule.
CoS Value Displays the COS (802.1p) value for this rule.
Secondary VLAN ID Displays the Secondary VLAN identifier value or range for this rule.
Secondary COS Displays the Secondary COS (802.1p) value for this rule.
Assign Queue Displays the queue identifier to which packets matching this rule are
assigned.
Redirect Interface Displays the slot/port to which packets matching this rule are
forwarded.
7.16.1.2 show mac access-lists
523
Command Reference
Lan Switch and Router Blade