System Log Management Commands; Show Commands - Fujitsu Siemens Computers PRIMERGY BX Description

System Log Management Commands

Syntax
spanning-tree edgeport
no spanning-tree edgeport
no - This command specifies that this port is not an Edge Port within the common and
internal spanning tree.
Default Setting
None
Command Mode
Interface Config
7.7 System Log Management Commands

7.7.1 Show Commands

7.7.1.1 show logging
This command displays logging.
Syntax
show logging
Default Setting
None
Command Mode
Privileged Exec
Display Message
Logging Client Local Port The port on the collector/relay to which syslog messages are
sent
CLI Command Logging The mode for CLI command logging.
Console Logging The mode for console logging.
Console Logging Severity Filter The minimum severity to log to the console log. Messages
with an equal or lower numerical severity are logged.
422
Command Reference
Lan Switch and Router Blade