Open Shortest Path First (Ospf) Commands; Show Commands - Fujitsu Siemens Computers PRIMERGY BX Description

Open Shortest Path First (OSPF) Commands

Syntax
encapsulation {ethernet | snap}
ethernet - The link layer encapsulation type is ethernet.
snap - The link layer encapsulation type is SNAP.
Default Setting
The default value is ethernet.
Command Mode
Interface Config
Restrictions
Routed frames are always Ethernet encapsulated when a frame is routed to a VLAN.
7.20 Open Shortest Path First (OSPF) Commands

7.20.1 Show Commands

7.20.1.1 show ip ospf
This command displays information relevant to the OSPF router
Syntax
show ip ospf
Default Setting
None
Command Mode
Privileged Exec
Display Messages
Router ID Is a 32 bit integer in dotted decimal format identifying the router.
OSPF Admin Mode The administrative mode of OSPF in the router.
ASBR Mode Reflects whether the ASBR mode is enabled or disabled. Enable implies that
the router is an autonomous system border router. Router automatically becomes an ASBR
555
Command Reference
Lan Switch and Router Blade