Removing A Slimline Optical Drive; Figure 37. Installing An Optical Drive Assembly Into The Server System; Figure 38. Removing The Slimline Optical Drive Assembly From The Server System - Intel SR1560SFHS - Server System - 0 MB RAM Service Manual

6. Insert the optical drive tray assembly into the server system as shown in the figure
below.

Figure 37. Installing an Optical Drive Assembly into the Server System

7. Verify that the blue release lever on the tray locks into place.
8. Obtain the cable from the hardware box and install the cable to the interposer board
and the server board.

Removing a Slimline Optical Drive

1. Press the blue release lever (see letter "A") to unlock the optical drive tray and
remove the slimline optical drive tray assembly from the server system (see letter
"B").
Figure 38. Removing the Slimline Optical Drive Assembly from the Server
®
Intel Server System SR1560SF Service Guide
A
B
System
AF000355
AF000384
37