Figure 30. Installing The Optical Drive Into The Server System - Intel SR1690WB - Server System - 0 MB RAM Service Manual
A guide for technically qualified assemblers of intel identified subassemblies/ products
Hide thumbs
Also See for SR1690WB - Server System - 0 MB RAM:
Table of Contents
Advertisement
5. Slide the optical drive assembly in through the front of the chassis, as shown by
letter "A in the following figure. The assembly will automatically be locked if the
drive assembly is in position.
6. Connect the SATA cable connector to SATA port 4 or 5 on server board.
7. Connect the SATA power connector to P6 connector from system power supply.
40
Figure 30. Installing the Optical Drive into the Server System
A
A
®
Intel
Server System SR1690WB Service Guide
B
AF003313
B
AF003314
Advertisement
Table of Contents
