Note: A nonskid surface or a stop behind the server system may be needed to prevent the server
system from sliding on your work surface.
1. Remove the top cover screw (see letter "A").
2. Slide the cover back until it stops and lift the cover upward to remove it (see letter
"B").
Installing the System Cover
Place the cover over the server system so that the side edges of the cover sit just inside the
server system sidewalls.
1. Slide the cover forward until it clicks into place (see letter "A").
2. Insert the screw at the center of the top cover (see letter "B").
®
Intel
Server System SR1560SF Service Guide
Figure 16. Removing the Server System Cover
Figure 17. Installing the Server System Cover
B
A
AF002371
A
B
AF002370
23