Installing the Server System Cover
1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. Place the cover over the server system so that the side edges of the cover sit just
inside the server system sidewalls. Slide the cover forward. See letter "A" in
Figure 13.
3. Install the screw at the front of the server. See letter "B" in Figure 13.
4. Reconnect all peripheral devices and the AC power cord.
®
Intel
Server System R1304BTSSFAN/R1304BTLSFAN/R1304BTLSHBN Service Guide
iii.
Recessed
Edge
Figure 13. Installing the Server System Cover
A
B
AF003703
"Safety
29