If either one or both indications are abnormal, replace
the fuel meter with a new one.
FUEL GUAGE SENDING UNIT INSPECTION
● Disconnect the lead wires coming out of the fuel
gauge and check resistance of each position.
● If the resistance measured is incorrect, replace the
fuel gauge assembly with a new one.
● The relation between the position of the fuel gauge
float and resistance is shown in the following table.
Relation between the position of the fuel
gauge float and resistance
Float position
F(Full)
1/2
E(Empty)
OIL LEVEL CHECK LIGHT
Resistance
0
Ϊ
10
- 6
Ϊ
38
+ 10
Ϊ
90
0
Oil level switch
IG switch
Battery
ELECTRICAL SYSTEM 5-8
F
1/2
E
Oil level check light