HYOSUNG Prima Service Manual page 61

3-33 ENGINE
● Install the bearing ② in the fixed driven face ① with
the special tool.
Bearing installer : 09943 - 88211
CAUTION
Take care that hit inner race of the bearing.
(Fall to ring in the bearing a case.)
● Install the circlip ③ .
CAUTION
Instert surely in the circlip groove.
● Install the bearing ④ with the special tool.
Bearing installer : 09943 - 88211
CAUTION
A mark part of the bearing is pointed to the out-
side.
● Install the new oil seals (⑤, ⑥) to the movable driven
face with the special tool.
Bearing installer : 09913 - 76010
● Apply SUPER GREASE " A " to the lip of oil seals
and groove of movable driven face' s inside.
Super Grease " A "
Thrust
�
Rounded coner
③
Oil seal
Insert up to contact
to the stopper.
②
①
④
⑥
⑤