Steering; Removal And Disassembly - HYOSUNG Prima Service Manual

STEERING

REMOVAL AND DISASSEMBLY

● Remove the handlebar cover.
● Remove the handlebar by removing the clamp bolt ①
and set bolt ② .
● Loosen the steering stem lock nut ③ with the special
tool.
Clamp wrench : 09940 - 10122
● Remove the front fork assembly by removing the lock
washer ④ , steering outer upper race ⑤ and dust seal
⑥ .
CAUTION
Do not drop the steering stem steel balls.
● Remove the steering outer lower race ⑦ with a chisel.
①
③
⑤
⑥
⑦
CHASSIS 6-18
②
④