HYOSUNG Prima Service Manual page 38

● Remove the oil seal ① from the gear box cover with
the special tool.
Oil seal remover : 09913 - 50121
CAUTION
The removed oil seal should be replaced with a
new one.
● Remove the bearing ② with the special tool.
Bearing installer : 09913 - 76010
CAUTION
The removed bearing should be replaced with a
new one.
● Remove the circlip ③ and final driven gear ④ .
● Remove the idle shaft ⑤ .
● Remove the drive shaft bearing ⑥ .
Rotor remover sliding shaft : 09930 - 30102
Bearing remover ( ф 12 mm) : 09921 - 20210
①
⑤
ENGINE 3-10
②
③
④
⑥