HYOSUNG Prima Service Manual page 67

3-39 ENGINE
● Apply SUPER GREASE " A " lightly on the kick
starter shaft rolling surface and install it on the
crankcase cover.
Super Grease " A "
● Position the kick starter shaft return spring and hook
the spring end on the crankcase cover boss ① .
● Install the clutch cover and kick starter lever ② .
CAUTION
Install the kick starter lever as shown in the illustra-
tion.
● Tighten the kick starter lever bolt to the specified
torque.
Kick starter lever bolt : 8~12 N∙m (0.8~1.2 kg∙m)
Concur with the mark.
①
②
13�