HYOSUNG Prima Service Manual page 62

● Install the movable driven face ① to the fixed driven
face ② .
CAUTION
When reinstalling the movable dirven face to the
fixed dirven face, make sure that the oil seal is
positioned properly.
● Position the two O-ring ③ .
● Install the pin ④ at three places on the driven face
hub.
● Apply SUPER GREASE " A " lightly to the cam part
where the pins are placed.
Super Grease " A "
● Install the movable driven face seat ⑤ .
CAUTION
The seat is installed rotatable naturally.
The O-ring get damaged, in case of installed by
force.
● Install the spring ⑥ .
● Install the clutch shoe assembly ⑦ and nut ⑧ .
Pin
Spacer
Insert as guide the rim.
①
②
③
④
⑤
⑧
⑦
⑥
ENGINE 3-34