HYOSUNG Prima Service Manual page 63

3-35 ENGINE
● Tighten the clutch shoe nut to the specified torque
with the special tool.
Rotor holder : 09930 - 40113
Clutch shoe nut : 40~60 N∙m (4.0~6.0 kg∙m)
● Insert the V-belt between the driven faces as deep
inside as possible while pulling the movable driven
face all the way outside to provide the maximum belt
clearance.
CAUTION
The V-belt should be positioned so that the
arrows on the belt periphery point the normal
turning direction.
The V-belt contact face on the driven faces
should be thoroughly cleaned to be free from oil.
● Thoroughly clean the clutch housing ① to be free
from oil and position it over the clutch shoe assem-
bly.
● Tighten the clutch housing nut ② to the specified
torque with the special tool.
Rotor holder : 09930 - 40113
Clutch housing nut : 40~60 N∙m (4.0~6.0 kg∙m)
①
②