Master Cylinder Inspection - HYOSUNG Prima Service Manual

6-13 CHASSIS

MASTER CYLINDER INSPECTION

Inspect the master cylinder bore for any scratches or
other damage.
Inspect the piston surface for scratches or other dam-
age.
Inspect the primary cup and dust boot for wear or dam-
age.
MASTER CYLINDER REASSEMBLY AND
REMOUNTING
Reassemble and remount the master cylinder in the
reverse order of removal and disassembly, and also
carry out the following steps.
CAUTION
Wash the master cylinder components with fresh
brake fluid before reassembly. Never use clean-
ing solvent or gasoline to wash them.
Apply brake fluid to the cylinder bore and all the
internals to be inserted into the bore.
● Reassemble and remount the master cylinder.(Refer
to page 6 11)
-
● When remounting the master cylinder on the handle-
bar, first tighten the clamp bolt for upside.
CAUTION
Bleed air after remounting the master cylinder.
spring
Piston
Primary cap
Second cap
Upside
Clearance
Boot
Circlip
Master cylinder
Handlebar