Steering; Front Suspension - HYOSUNG Prima Service Manual

Hide thumbs Also See for Prima:
Table of Contents

Advertisement

2-11 MAINTENANCE PROCEDURE
CAUTION
The standard tire fitted on this motorcycle is
110/70 - 12 47J for front and 120/70 - 12 51J for rear.
The use of a tire other than the standard may
cause handling instability. It is highly recom-
mended to use a HYOSUNG Genuine Tire.
COLD INFLATION
TIRE PRESSURE
SOLO RIDING
kpa
FRONT
123
REAR
196
TIRE TREAD CONDITION
Operating the motorcycle with the excessively worn tires
will decrease riding stability and consequently invite a
dangerous situation. It is highly recommended to
replace the tire when the remaining depth of tire tread
reaches the following specification.
TREAD DEPTH SERVICE LIMIT
FRONT
REAR

STEERING

NOTE:
Inspect Initial 1,000 km and Every 4,000 km.
Steering should be adjusted properly for smooth turning
of handlebars and safe running. Too stiff steering pre-
vents smooth turning of handlebars and too loose steer-
ing will cause poor stability.
Check that there is no play in the front fork assembly by
supporting the machine so that the front wheel is off the
ground, with wheel straight ahead, grasp lower shock
absorber near the axle and pull forward. If play is
found, perform steering bearing adjustment.(Refer to
page 6 - 21)

FRONT SUSPENSION

NOTE:
Inspect Initial 1,000 km and Every 8,000 km.
Inspect the front shock absorber for oil leakage or other
damage, and replace the defective parts, if necessary.
NORMAL RIDING
DUAL RIDING
kg/㎠
kpa
kg/㎠
1.25
172
1.75
2.00
221
2.25
1.6 mm
1.6 mm
OVER
NORMAL
SHORT

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents