Table of Contents
Advertisement
12
Motion Detection
Configure motion detection settings to ensure that events are captured according to your
preferences.
12.1 Status Icons
The system displays different icons in the bottom left–hand corner of the camera image to inform
you of motion detection events:
• Motion detection: Motion has been detected by the camera. An
bottom left-hand corner of the camera image to show that motion was detected, but the sys-
tem is not recording a motion event. This is because motion recording is not enabled on the
channel, or the movement detected by the camera was not significant enough to trigger mo-
tion recording. See 12.2 Configuring Motion Detection, page 37 to configure settings for mo-
tion detection and recording.
• Motion recording: Motion-triggered video recording. An
left-hand corner of the camera image when a motion event is being recorded.
12.2 Configuring Motion Detection
Set preferences for motion detection per channel.
To configure motion detection:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click EVENTS, then click Event Settings on the side panel. In the drop-down click Motion
and configure:
3. Select a channel to configure motion detection for.
4. Check to enable motion detection on the selected channel.
#LX400113; r. 9.0/57192/57197; en-US
icon is shown in the
icon is shown in the bottom
37
Advertisement
Table of Contents
