Bht Screen - Denso BHT-825QW User Manual

BHT-825Q series

1.2.3 BHT Screen

If the system display is set to ON at the system settings or in the user program, icons display at the bottom of the
screen (default) indicating the key shift status, alphabet entry status, and status of the link with the CU-811.
This is the battery icon.
Shows battery level. (See page 21)
Shows that the SF key is pressed when the keys are in the shift-mode.
SF
Shows that the "alphabet entry" mode is set.
ALP Press the SF key to change the "numeric entry" to the "alphabet entry" when the alphabet entry mode is set by the
user program. (See "Programming manual, section 7.2.1")
Alphabet entry is used for setting up the FTP.
Shows that the CU-811 is connected.
Blinks when the CU-811 which is not connected tries to connect.
The icons are displayed in the following order,
when;
-No response from the CU-811.
-Waiting for the connection to the CU-811.
-Waiting for the disconnection from the CU-811
Shows the radio field strength when the BHT is connected to the access point.
More bars equals the stronger connection
→
Strong
shows that the BHT is not connected to the access point.
Shows the Bluetooth
: Shows that the Bluetooth
: Shows that the Bluetooth
: Shows that the Bluetooth
10
Connection status with the Bluetooth® device
Connection status with access point
Link status with CU-811
Alphabet entry status
Key shift status
Battery icon
→ →
Weak
®
status.
®
device is turned ON.
®
device is connected.
®
device is in lower power consumption mode.
.