Denso BHT-825QW User Manual page 90

・Data Matrix
Reading data
1 2 3
(Ex.) When scanned code is "data matrix, Error-correcting level ECC200, Longitudinal cells: 10, Lateral
cells: 10"...z0200010010
"5: ITF": Minimum number of digits to be read for ITF
"6: CODABAR": Minimum number of digits to be read for Codabar
Set minimum number of digits for the Code to be read.
Press [ ] to decrease the setting value and [ ] to increase the setting value.
ITF entry range:
Codabar entry range:
Setting a small number of digits increases the frequency of missing digits when reading or incorrectly
reading depending on how codes are read or the quality of codes.
On the other hand, setting a large number will decrease the possibility of such errors.
"7: CODEMARK": Setting the types of Code mark
Set the types of Code mark.
"0":CODE MARK Type1
CODE MARK system is defined by DENSO Corporation.
"1":CODE MARK Type2
CODE MARK system is compliant with "Guidelines on Symbology Identifiers" by AIM USA.
N+1 N+2 N+3
N—1 N
Error-correcting level
"Z"
Model
2 - 20 (default: 4)
3 - 20 (default: 4)
2D Code Handy Terminal
Option data
N+4 N+5 N+6 N+7 N+8
Longitudinal cells
N+9 N+10 N+11
Lateral cells
75