Denso BHT-825QW User Manual page 181

BHT-825Q series
[2] Site Survey Menu
1.
Select "2: SITE SURVEY" at the RF MENU and then press
the ENT key.
The SITE SURVEY screen on the right displays.
Press the BS/C key to return to the RF MENU screen.
2.
Press the ENT key.
The current communication status displays in real time.
[ASSOCIATED AP]:
Displays the MAC address of the wireless interface for the associated
access point.
[SIGNAL STRENGTH]:
Displays the signal strength of received packets.
[LINK QUALITY]:
Displays the overall communication quality with the access point.
Display
EXCELLENT
GOOD
FAIR
POOR
NOT ASSOCIATED
[CHANNEL]:
Displays the current communication channel.
Press the BS/C key to return to the SITE SURVEY menu.
[3] RF Version
1.
Select "3: VERSION" at the RF MENU and then press
the ENT key.
The screen on the right displays after information is acquired.
[V X.XX]:
[MACID]:
Press the BS/C key to return to the RF MENU.
166
Communication Status
Excellent communication link
Poor communication link
Not associated with an access point
Wireless module firmware version
Wireless module MACID