Denso BHT-825QW User Manual page 28

Charging with the communication unit (CU-801, CU-811 and CU-821)
or battery charger (CH-851 and CH-854)
1.
Slide the battery cartridge cover release button (1)
in the direction indicated by the arrow and remove
the battery cartridge cover (2).
2.
Check the battery cartridge terminals and indication
on the BHT unit, and then insert the cartridge in the
direction indicated by the arrow.
− Point − Do not use battery cartridges other than
that specified by DENSO WAVE.
3.
Insert the battery cartridge cover tab (1), and then
close the battery cartridge cover (2) to lock the
cover in position. Press the battery cover into
place until a click is heard.
2D Code Handy Terminal
13