Denso BHT-825QW User Manual page 192

Searching for services
1.
Select "2: BROWSE SERVICE" in the BROWSE DEVICE menu
and then press the ENT key.
The screen on the right is displayed.
[1: DO IT]: Starts service inquiry.
[2: TIMEOUT]: Sets up the services inquiry time.
Press the Backspace/clear key to return to the BROWSE DEVICE menu.
2.
Use the cursor keys ([▲] [▼]) or numeric key ([2]) to highlight the
[2: TIMEOUT] and then press the ENT key
Entry mode is activated and the cursor is displayed.
3.
Use the numeric keys to enter the desired value.
Set up the service inquiry time to search services.
The service inquiry time is used only for the service search ([1: DO IT] menu).
Valid Range: 1 -255, Default: 30 seconds
Note that the setting specified here will not be saved.
To delete a single character, press the Backspace/clear key. To delete the entire entry, press and hold
the Backspace/clear key or press the SF and Backspace/clear keys simultaneously.
4.
Press the ENT key.
5.
Use the cursor keys ([▲] [▼]) or numeric key ([1]) to highlight the [1:
DO IT] and then press the ENT key.
The screen on the right is displayed.
Connects to the specified destination remote device, and then searches for
the services provided by the destination remote device.
Press the Backspace/clear key to return to the BROWSE DEVICE menu.
2D Code Handy Terminal
177