Denso BHT-825QW User Manual page 93

BHT-825Q series
2.
Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3] [4]) to select the item to be set and
press the ENT key.
3.
Press the ENT key or BS/C key for the settings value to be valid and then return to the OPEN
BAR SETTING screen.
[2] BUZZER/LED control
1.
Select "2: BUZZER/LED" at OPEN BAR SETTINGS and then press
the ENT key.
Speaker/LED control settings screen displays.
The highlighted settings are the current settings.
"1：BUZZER"：
Enable to set Speaker/Vibrator beeping when a read of a code is
successful.
"ON" ：
"OFF"：Speaker/"Vibrator doesn't beep when a read of a code is successful.
"2：LED"：
Enable to set LED illuminations when a read of a code is successful.
"ON" ：LED lights in blue when a read of a code is successful.
"OFF"：LED doesn't light when a read of a code is successful.
2.
Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2]) to select the item to be set and press
the ENT key.
3.
Use the cursor keys ([◄] [►]) to select settings value.
4.
Press the ENT key or the BS/C key for the settings value to be valid and then return to the
OPEN BAR SETTING screen.
78
Speaker/Vibrator beeps when a read of a code is
successful.