Denso BHT-825QW User Manual page 187

BHT-825Q series
Setting up the slave station
1.
Select "4: SLAVE" in the SET BLUETOOTH menu and then press
the ENT key.
The current settings are displayed.
[1: PASSKEY]:
[2: TIMEOUT]:
[3: SECURITY]: Sets up the security mode for the slave station.
Press the Backspace/clear key to return to the SET BLUETOOTH menu.
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3]) to select
the menu and then press the ENT key.
Entry mode is activated and the cursor is displayed.
To set up the "3: SECURITY", use the cursor keys ([◄] [►]) to highlight and set the desired setting.
3.
Use the numeric and period (.) keys to enter the desired value.
"PASSKEY";
"TIMEOUT"
For the Bluetooth
®
Bluetooth wireless communications".
To switch the entry mode (between numeric and alphabet entries), press the SF key.
To delete a single character, press the Backspace/clear key. To delete the entire entry, press and hold
the Backspace/clear key or press the SF and Backspace/clear keys simultaneously.
4.
Press the ENT key.
5.
Press the BS/C key to return to the SET BLUETOOTH menu.
172
®
Sets up the Bluetooth passkey for the slave station.
Sets up the timeout limit in seconds.
Up to 16 characters
Valid Range: 1-255, Default : 255 seconds
®
passkey and the security mode details, refer to "Chapter 5 Communication" – "5.3