Denso BHT-825QW User Manual page 81

BHT-825Q series
FTP option, Line delimiters (CR/LF)
FTP option, Handling of line delimiters
FTP option, Handling of trailing spaces in data fields
FTP option, Upload mode
FTP option, Verbose mode
IP address of host computer for ping-test
Data size of echo request
Echo request intervals
Timeout period for echo request
No. of echo requests to be sent
Echo request send timing
TCP/IP operation device
TCP/IP link layer
Transmission speed between BHT and CU
No. of retries for link establishment command to be sent
Link establishment command intervals
No. of retries for link release command to be sent
Link release command intervals
Link release period
Service Set ID (SSID) (Not possible to copy correctly if there is a space at the end.)
Power save mode for wireless module
Authentication system
WEP (Wired Equivalent Privacy) (enable/disable)
Maximum DHCP IP address acquisition wait time
Wireless method
Wireless security mode
Wireless security EAP authentication method
Wireless security encryption method
Wireless security root certificate filename
Wireless security EAP start time
Wireless security retry interval for non-response
Wireless security retry interval for authentication failure
Wireless security retry interval for authentication start failure
Wireless security retry count for authentication start failure
PPP authentication name
PPP authentication password
PPP authentication method
Bluetooth device name
Remote device address for the connection target
Device detection time
Number of detcted device
Bluetooth® passkey
for the master station
66