Initializing The Bht System - Denso BHT-825QW User Manual

BHT-825Q series

4.1 Initializing the BHT System

By initializing the system, program files and data files downloaded to the BHT user area are deleted, and system
settings are returned to the default status when shipped from the factory.
The system must be initialized when:
• Deleting all program files and data files downloaded to the BHT user area (font files are also deleted by
selecting the area subject to initialization.)
• The following message displays on the screen when the BHT is turned on.
By initializing the system, all files in the user area are deleted, and therefore all files that need to be
- Point -
backed up should be uploaded to the host computer and so on beforehand.
Refer to section "4.5.4 Uploading Files (UPLOAD Menu)" for details of uploading.
The initialization procedure is described on the following pages.
Perform operation in accordance with the procedure for each item.
ν Selecting the Memory Area to be Initialized
↓
ν Selecting the Message Version (English or Japanese)
↓
ν Confirming the Memory Area to be Selected for Initialization
↓
ν Performing System Initialization
36