Denso BHT-825QW User Manual page 117

BHT-825Q series
"1: PARAMETER": Setting the communication parameters
Select "1: PARAMETER" to display the screen shown on the right.
The highlighted setting will be the current setting.
"1: TRANSMIT SPEED": Setting the transmission speed
To change the setting, highlight the transmission speed with the cursor
keys ([◄] [►]) and press the ENT key.
Press the BS/C key to return to the SET OPTICAL menu.
"2: PROTOCOL": Communication protocol options setting screen
Select "2: PROTOCOL" to display the screen shown on the right
The highlighted settings will be the current settings.
"1: SERIAL No.":
Selects whether or not to add serial numbers to data blocks.
"2: H.PARITY":
Selects whether or not to add horizontal parity.
"3: LINKUP TIME":
Selects the timeout length (in seconds) to be applied when a link is to be
established.
"4: FIELD SPACE":
Specifies handling for trailing spaces in fields.
To trim trailing spaces in fields, select "Ignore", and to retain them as data, select "Data".
To make changes, use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3] [4]) to highlight the item to
be set, highlight the setting value using the cursor keys ([◄] [►]), and then press the ENT key.
Press the BS/C key to return to the SET OPTICAL menu.
Selecting the BHT-Ir or YMODEM protocol ignores the serial number and horizontal parity
- Point -
settings.
102