Denso BHT-825QW User Manual page 62

Setting Value Selection
Use the following procedure to select setting values.
1.
Press the numerical key corresponding to the item to be selected.
Alternatively, press the cursor keys ([▲] [▼]) to select the item.
The selected item will be highlighted.
2.
Select the setting value with the cursor keys ([◄] [►]).
3.
Press the ENT key.
The selected setting value will be set.
2D Code Handy Terminal
Operation example
Select the setting item with the
[2] key or [▲]/[▼] keys.
Select the setting value with
the cursor keys ([◄] [►]).
ENT key
47