Denso BHT-825QW User Manual page 135

BHT-825Q series
*1: The codes with more than 4 digits are read for ITF.
*2: CODE MARK Type 2 is the Code Mark system that is compliant with "Guidelines on Symbology
Identifiers" by AIM USA . Suffix "m" differs from the data format of bar code system, as shown in the table
below.
e.g.）]I1
For example, ITF is set to read "with C/D, code mark is "]I1"
Code type
2D Code
QR Code
iQR Code
MaxiCode
Data Matrix
Bar code
Interleaved 2of5（ITF）
Code 39
Codabar（NW-7）
Code 128
C/D：check digits
*3: The code types that are not compliant with with "Guidelines on Symbology Identifiers" by AIM USA use
the Code mark Type 1.
120
]：Flag Character (ASCII 93)
I：Code Character (ITF)
1：Modifer Character (tabel below)
Modifer
Comment
Character
model1
0
1 Model 2
3 model2（The first character from the start code is FNC1）
The first character fromt the start code doesnt include
A
FNC1.
C The first character from the start code is FNC1.
0 mode4、mode5
1 mode2、mode3
1 ECC-200
2 ECC-200（The 5th character from the start code is FNC1）
ECC-200（The 2
3
FNC1）
0 Read without C/D
1 Read without C/D C/D
0 Read without C/D
1 Read without C/D
0 Read without C/D
1 Read without C/D
The 1
0
include FNC1.
2 The 2
nd th
or 6 characters from the start codeis
st nd
and 2 characters from the start code doesnt
nd
character from the start code is FNC1