Holding The Bht; Step 3 Turning On The Power - Denso BHT-800 Series Operator's Manual

Step 2 Wearing the Hand Strap
Always wear the hand strap at your wrist to prevent the BHT being accidentally dropped during the operation.
Attaching the Hand Strap
Attach the hand strap to the body as shown below.

Holding the BHT

Wear the hand strap at your wrist and hold the BHT as shown below.

Step 3 Turning ON the Power

Turn ON the power after inserting the fully charged battery cartridge into the BHT.
The date and time are not set at the time of purchase. You are required to set the date and time when
turning ON the power for the first time.
1
Press the Power (
ON the BHT.
2 Enter the date and time using the
numeric keys.
[Ex.] September 4, 2009, 14:20
Point
Enter the last two digits for the year, and
enter the time in 24-hour clock format.
3 Press the Enter key to set the date
and time.
4
Press the numeric key [1] and the
Enter key. Then, select [1:Yes].
Point
The power turns OFF by selecting [2:No].
) key to turn
-10-
or
The screen below displays.
The screen below displays
when the date and time are set.
A scaning demo commences.
The scaning demo is a program
that allows codes to be read
without a user program. Press
the trigger switch to enable
code reading.