Denso BHT-825QW User Manual page 30

Charging with the battery charger (CH-201A and CH-704)
1.
Check the battery cartridge terminals and insert the
cartridge.
2.
Connect the power cable to the CH-201A and
connect the plug to a commercial AC power source
(230 V AC).
The LED will turn red when charging is commenced.
3.
The LED will turn OFF when charging is complete.
− Point − Charging
hours.
An only slightly discharged battery
cartridge should take this time to
become fully charged.
4.
Slide the battery cartridge cover release button (1)
in the direction indicated by the arrow and remove
the battery cartridge cover (2).
takes approximately 3
2D Code Handy Terminal
Red LED ON
OFF
Terminal
15