Denso BHT-825QW User Manual page 182

Use the following procedure to set Bluetooth wireless communications.
1.
Select "BLUETOOTH" in the DEVICE MENU and then press the ENT key.
The BLUETOOTH MENU screen on the right is displayed.
[1: INFORMATION]:
Displays the Bluetooth
[2: SET BLUETOOTH]:
Sets up the Bluetooth
[3: BROWSE DEVICE]:
Detects accessible Bluetooth
[4: SERIAL PORT]:
Transfers files via the serial port profile.
Refer to the following sections for each of the above menus.
Press the BS/C key to return to the DEVICE MENU.
[1] Viewing Bluetooth® information
1.
Select "1: INFORMATION" in the BLUETOOTH MENU and then
press the ENT key.
®
Bluetooth system version, firmware version, address, and Bluetooth
device name are displayed.
Press the BS/C key to return to the BLUETOOTH MENU.
®
When the Bluetooth
right is displayed.
Pressing the Backspace/clear key while this message is on
− Point −
the screen will not return to the BLUETOOTH MENU.
®
interface information.
®
parameter.
®
devices available in the vicinity.
information is read from the device, the screen on the
2D Code Handy Terminal
®
167