Denso BHT-825QW User Manual page 103

BHT-825Q series
"2:2D CODE"：2D Code
Select "2:2D CODE" and press ENT key at SET READ CODE to display SET 2D
CODE screen, allowing the code to be set to enable/disable. The highlighted
settings are the current settings.
To change the settings, use the cursor keys
（[1][2][3][4][5][6]）to select the item to be set and then select the setting value
using the cursor keys ([◄] [►]).
"1：QRCODE"：
Enable/disable QR Code.
"2：iQRCODE"：
Enable/disable iQR Code.
"3：DATAMATRIX"：
Enable/disasble Data Matrix.
"4：PDF417"：
Enable/disable PDF417.
"5：MAXICODE"：
Enable/disable MaxiCode.
"6：COMPOSITE"：
Enable/disable COMPOSITE.
Press ENT key for the detailed settings of the 2D code being selected. Refer to the following section for
the details. Press the BS/C key for the settings value to be valid and then return to the SET READ
CODE screen.
- Point - "1：QRCODE", "Q2：iQRCODE", "Q3：DATAMATRIX", "Q4：PDF417Q" have different types
of code readings, which allows code readings to be set enable /disable at the detailed
settings according to the type of code readings. If enable, both this setting and the detailed
settings need to be Enabled.
- Point - No detailed settings for "5:MAXICODE" and "6:COMPOSITE".
88
([▲] [▼]) or numerical keys