Denso BHT-825QW User Manual page 105

BHT-825Q series
（QR Code model1 setting）
"3：READING"：
Enable/disable QR Code model 1
"4：MIN"：
Set the minimum code version of QR Code model 1.
Setting ragne：
"5：MAX"：
Set the maximum code version of QR Code mode1.
Setting range：
（QR Code model 2 setting）
"6：READING"：
Enabel/disable QR Code model 2.
"7：MIN"：
Set the minimum code version of QR Code model 2.
Setting range：
"8：MAX"：
Set the maximum code verion of QR Code model 2.
Setting range：
QR Code 2／2
（Micro QR Code setting）
"1：READING"：
Enable/disable QR Code model 2.
"2：MIN"：
Set the minimum code version of QR Code model 2.
Setting range：
"3：MAX"：
Set the maximum code verion of QR Code model 2.
Setting range：
（SQRC Code setting）
"4：READING"：
Enable/disable SQRC Code.
"5：MIN"：
Set the minimum code version of SQRC.
Setting range：
"6：MAX"：
Set the minimum code version of SQRC.
Setting range：
"7：ENC KEY UNMATCH"：
Enable/disable public data when encryption key is unmatched.
"NOTHING"：The public data is not read when the encryption key is unmatched.
"PUBLIC DATA ONLY"：The public data is read when the encryption key is unmatched.
━ Point ━
90
1～22
1～22
1～40
1～40
1～4
1～4
1～40
1～40
Set the value of minimum code version to less than that of maximum code version. If the
value of minimum code version is larger than that of maximum code version, error occurs
when reading.
Set the minimum/maximum code version within the setting range listed above. If the value
is out of the setting range, error occurs.