Denso BHT-825QW User Manual page 226

4.
Insert the battery cartridge cover tab (1), and then
close the battery cartridge cover (2) to lock the cover
in position. Press the battery cover into place until a
click is heard.
Battery Cartridge Recycling Request
・ This product uses a lithium-ion battery that contains scarce, recyclable resources. We kindly ask for
your cooperation in recycling to ensure reuse of these resources.
・ Used battery cartridges must not be disposed of as combustibles.
・ Contact your nearest rechargeable battery recycling center or local sales office for information on
disposal procedures.
・ When disposing of used battery cartridges at your nearest recycle center, cover the terminals with vinyl
tape to insulate and protect from overheating or fire due to a short-circuit.
・ Never disassemble battery cartridges.
Mishandling may result in battery cartridge overheating, smoke generation, blowout or
combustion. Please read the following items prior to use.
Never charge the battery cartridge in the vicinity of fire or under a scorching sun.
Always use a dedicated charger to charge the battery cartridge.
Mishandling may result in battery cartridge overheating, smoke generation, blowout or
combustion. Please read the following item prior to use.
Terminate charging if not completed even after the specified time has elapsed.
Replace the battery cartridge promptly.
− Note −
Always turn the BHT power OFF before replacing the battery cartridge. Replace the depleted
battery cartridge with a new one within three minutes to avoid data loss. Following
replacement, turn ON the BHT power and check operation.
The battery cartridge is charged using either a CU-801/811/821 communication unit (option) or
CH-851/854/201A/704 battery charger (option). Refer to the respective User's Manual
provided with each device for details of the charging method for the CH-851/854/201A/704.
If a "Battery voltage has lowered." or "Replace or recharge the battery cartridge." message
displays when impact is applied to the BHT, reboot the BHT and check the battery voltage
level. The battery may not actually be depleted.
The crossed-out wheeled bin is applicable
for EU member status only.
2D Code Handy Terminal
211