Denso BHT-825QW User Manual page 96

"1:EAN/UPC"：Detailed settings for EAN/UPC
1.
Select "1: EAN/UPC" at SET BARCODE menu and then press the ENT
key.
SET EAN/UPC screen displays.
EAN/UPC 1／3
（EAN-13/UPC-A set）
"1：READING"：
Enable/Disable EAN-13/UPC-A
"2：1ST CHARACTER"：
"3：2ND CHARACTER"：
Allocate 「?， 0～9」 to the first and second characters of EAN-13/UPC-A
(country flags) .
If 「0～9」is allocated at the menu, limitation can be set to read only
when allocated numeric characters matchs to the first and second
numeric characters of EAN-13/UPC-A. It can read umlimitedly when「?」
is allocated.
（Add-on set of EAN-13/UPC-A）
"4：READING"：
Enable/Disable EAN-13/UPC-A with Add-on.
EAN/UPC 2／3
（EAN-8 set）
"1：READING"：
Enable/Disable EAN-8
"2：1ST CHARACTER"：
"3：2ND CHARACTER"：
Allocate 「?， 0～9」 to the first and second characters of EAN-8 (country flags).
If 「0～9」is allocated at the menu, limitation can be set to read only
when allocated numeric characters matchs to the first and second numeric
characters of EAN-8. It can read umlimitedly when「?」is allocated.
（EAN-8 Add-on set）
"4：READING"：
Enable/Disable EAN-8 with Add-on.
EAN/UPC 3／3
（UPC-E set）
"1：READING"：
Enable/Disable UPC-E.
"2：1ST CHARACTER"：
"3：2ND CHARACTER"：
Allocate「?，0～9」to the first and second characters of UPC-E (country flags).
If 「0～9」 is allocated at the menu, limitation can be set to read only when allocated numeric characters
matchs to the first and second numeric characters of UPC-E. It can read umlimitedly when「?」is
allocated.
（UPC-E add-on set）
"4：READING"：
Enable/Disable UPC-E with Add-on
2D Code Handy Terminal
Changeover
with [▲
][ ▼
]key
Changeover
with[ ▲
][ ▼
]key
81