Denso BHT-825QW User Manual page 92

"3: OPEN BAR SEETTINGS": Setting "The FUNCTION TO
ASSIGN SCAN SETTINGS WITH THE SYSTEM SETTINGS"
1.
Select "3:OPEN BAR SEETTINGS" at SET QRCODE and then press
the ENT key.
OPEN BAR SETTING screen displays.
1: READ MODE: Read mode
The READ MODE screen displays
2: BUZZER/LED: Speaker/LED control
The SPEAKER/LED screen displays
3: READ CODE: Read code
The READ CODE screen displays
Refer to the following section for details of the above items.
2.
Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3]) to select the item to be set and press
the ENT key.
3.
Press the BS/C key to return to the SET QRCODE menu.
[1] Read mode
1.
Select "1:READ MODE" at OPEN BAR SETTING and then press the
ENT key.
SET READ MODE screen displays.
The highlighted settings are the current settings.
"1：AUTO OFF"：Auto-off mode
If the trigger operation is not operated, it turnes off the illumination LED
after the certain amount of time.
"2：MOMENTARY"：Momentary mode
Only while you hold down the trigger swich, the illumination LED lights.
"3：ALTERNATE"：Alternate mode
The illumination LED is turned ON/OFF repeatedly, every time trigger switch
is pressed over.
"4：CONTINUOUS"：Continuous lighting mode
The illimination LED lights continiously.
2D Code Handy Terminal
77