Denso BHT-825QW User Manual page 94

[3] Read code
1.
Select "3: READ CODE" at OPEN BAR SETTING and then press the
ENT key.
SET READ CODE screen displays.
"1：BARCODE"：
The BARCODE screen displays.
"2：2D CODE"：
The 2D CODE screen displays.
"3：MULTI-LINE"：
The MULTI-LINE screen displays
Refer to the following section for details of the above items.
2.
Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3]) to select the item to be set and
press the ENT key.
3.
Press the BS/C key to return to the OEPN BAR SETTING menu.
"1:BARCODE"：Bar code
Select "1:BARCODE" and press ENT key at SET READ CODE menu to display the SET BARCODE screen,
allowing code reading to be set to enable (ON) or disable (OFF). The highlighted
settings are the current settings.
To change the settings, use the cursor keys （[▲][▼]）or numerical keys
（[1][2][3][4][5][6][7]）to select the item to be set and select the setting value using
the cursor keys （[ ][ ]）.
"1：EAN/UPC"：
Enable/disable EAN/UPC Code
"2：ITF"：
Enable/disable Interleaved 2 of 5
"3：CODABAR"：
Enable/disable Codabar（NW-7）
"4：CODE39"：
Enable/disable Code 39
"5：CODE93"：
Enable/disable Code 93
"6：CODE128"：
Enable/disable Code 128
"7：RSS"：
Enable/disable RSS（GS1 Databar）
2D Code Handy Terminal
79