Figure 4-16 Installing A Dimm; Figure 4-17 Removing A Dimm - HP AlphaServer TS15 Owner's Manual

Figure 4–16 Installing a DIMM
5. To install the DIMM
as shown.
6. Secure the DIMM with the clips
Verification
1. Turn on power to the system.
2. At the SRM prompt, issue the show memory command to display the amount of
memory in each array and the total memory in the system.
Figure 4–17 Removing a DIMM
1. Release the clips
2. Slide out the DIMM as shown in the preceding figure.
, align the notches on the gold fingers with the connector keys
on the DIMM slot.
securing the appropriate DIMM
Installing and Configuring Options
.
4-27