HP AlphaServer TS15 Owner's Manual page 154

Editing the Nvram Script
You can create an nvram script to include any commands you want the system to execute at
power-up.
You create and edit the nvram script using the SRM edit command. With edit, lines may be
added, overwritten, or deleted.
The syntax is:
edit file
file is the name of the file to be edited.
The editing commands are:
Displays the brief help file.
help
list Lists the current file prefixed with line numbers.
renumber Renumbers the lines of the file in increments of 10.
exit Leaves the editor and closes the file, saving all changes.
quit Leaves the editor and closes the file without saving changes.
nn Deletes line number nn.
nn text Adds or overwrites line number nn with text.
CAUTION: Use caution when editing the nvram script. It is possible to disable the
system by including an inappropriate command. For example, if you include
the init command in the script, the system will go into an endless loop.
To correct this error, issue the RMC halt in command, then power up or
reset the system. When the >>> prompt is displayed, edit the nvram script to
remove the illegal command.
5-30 hp AlphaServer TS15 Owner's Guide