Power-Up Displays - HP AlphaServer TS15 Owner's Manual

2.2

Power-Up Displays

Power-up information is displayed on the operator control panel LEDs and on the
console terminal startup screen. Messages sent from the serial read-only memory
(SROM) program are displayed first, followed by messages from the SRM console.
NOTE: The power-up text that is displayed on the screen depends on the kind of terminal
that is connected as the console terminal: either VT or VGA.
If the SRM console environment variable is set to serial, the entire power-up
display, consisting of the SROM and SRM power-up messages, is displayed on the
VT terminal screen. If console is set to graphics, SROM messages are not
displayed, and the SRM messages are delayed until VGA initialization has
completed. If the COM1_mode is set to through or snoop, RMC will also display
power-up and power-down error messages to COM1.
Operating the System 2-3