Testing The System; Example 5-10 Test - HP AlphaServer TS15 Owner's Manual

5.12 Testing the System

Use the test command to run firmware diagnostics for components of the system. Use
Ctrl/C to abort testing.
An explanation follows this example.
Example 5–10 Test
>>> test
Testing the Memory (full)
.
No DY* Disks available for testing
No DZ* Disks available for testing
Testing the DK* Disks (read only)
No DR* Disks available for testing
Testing the DQ* Disks (read only)
No DF* Disks available for testing
No MK* Tapes available for testing
No MU* Tapes available for testing
No VGA available for testing
Testing the EI* Network
>>>
5-18 hp AlphaServer TS15 Owner's Guide